Panduit Cat 6A F/UTP

Electrical performance: Certified channel performance in a 4-connector configuration up to
100 meters and exceeds the requirements of ISO 11801 Class EA
and ANSI/TIA-568-C.2 Category 6A standards for supporting
10GBASE-T transmission over twisted-pair cabling systems as part
of the Panduit ® TX6A™ 10Gig™ Shielded Copper Cabling System
Certified component performance up to 100 meters and meets or
exceeds the component requirement of the ISO/IEC 11801 Category
6A and ANSI/TIA-568-C.2 Category 6A standards for supporting
10GBASE-T transmission over twisted-pair cabling systems
Conductors/insulators: 23 AWG solid bare copper wire covered by PE insulation
Flame rating: LSZH: IEC 60332-1, IEC 60754-1, IEC 60754-2, IEC 601034-2
CM: UL 1685
CMR: UL 1666
CMP: NFPA 262
Installation tension: 110 N (25 lbf) maximum
Temperature rating: -4°C to 167°C (-20°F to 75°F)
Installation (Operation)
Cable jacket: LSZH, CM, CMR, CMP
Cable diameter: LSZH: 7.3mm (0.287 in.) nominal
CM, CMR: 7.2mm (0.284 in.) nominal
CMP: 7.5mm (0.296 in.) nominal
Cable weight: LSZH: 16 kg/305m (35 lbs./1000 ft.)
CM, CMR: 15 kg/305m (33 lbs./1000 ft.)
CMP: 19kb/305m (42 lbs./1000 ft.)
Packaging: LSZH: 18 kg/ 305m (40 lbs./1000 ft.) on a reel
CM, CMR: 17 kg/ 305m (37 lbs./1000 ft.) on a reel
CMP: 20kg/305m (46 lbs./1000 ft.)
Packaged tested to ISTA Procedure 1A
key features and benefits
applications
technical information
specifications
Category 6A cable shall be constructed of 23 AWG copper
conductors with PE CM, CMR or LSZH insulation. The copper
conductors shall be twisted in pairs and separated by an integrated
pair separator. All four pairs shall be surrounded by an overall
metallic foil shield within a low smoke zero halogen jacket. The
TX6A™ 10Gig™ Shielded Copper Cable must be installed as part of
a complete TX6A™ 10Gig™ Shielded Copper Cabling System to
achieve 10GBASE-T certified performance.
Integrated pair divider: Separates pairs for exceptional cable performance
Overall foil shield: Provides superior structural integrity and reduces low
frequency external interference to ensure exceptional cable
performance at all swept frequencies up to 500 MHz
Internal drain wire: Facilitates means of grounding the cable and provides for efficient
performance and protection of network investment
Descending length Easy identification of remaining cable reduces installation time and
cable markings: cable scrap
Bulk packaging: Supplied 305m (1000 ft.) to a reel
TX6A™ 10Gig™ Shielded Copper Cable is a
component of the Panduit ® TX6A™ 10Gig™ Shielded
Copper Cabling System. This end-to-end system
provides a cost-effective medium for ensuring that
network bandwidth needs are easily met today and
tomorrow. The shielded cabling system provides high
performance, excellent EMI suppression, and aids in
secure data transmission. The Panduit solution helps
ensure organizations efficiently and reliably meet
their data transmission needs. Usage of the TX6A™
10Gig™ Shielded Copper Cabling System include
high bandwidth applications within data centers and
connections to high-end workstations such as:
• 10GBASE-T Ethernet
• Data Center applications
• Virtual business management applications